Road surfaces,

cold coatings and hot coatings

Dual-function anti-adhesive and tar remover for construction sites

- Ready-to-use
- Improved occupational safety
- Made from new-generation
vegetable oil esters
- Completely biodegradable

- Adapted cleaning power to don't degrade road coating under construction. Use pure

DESCRIPTION

VIA 5000 is a concentrated liquid intended for bitumen-removal and anti-adhesive
treatment, for use during the transportation and application of road surfaces.

VIA 5000 is specifically designed to replace fuel oil and rapeseed methyl esters. It complies directly with the expectations of site managers, safety coordinators and operating managers  in terms of occupational health and safety and the environment, and in terms of performance and compatibility with regard to equipment and the working environment.

Better formulation for safety

VIA 5000 is non-flammable and eliminates the obligation for workshops in the usage zone to be classified as ATEX zones (French administrative order of 8 July 2003). On worksites, VIA 5000 takes the place of fuel oil, which can cause fires. Fuel oil has a flash point of 55°C, so is not suitable for use in an environment with a temperature of 160°C.

Better formulation for health

VIA 5000 does not contains solvents so does not emit vapours. In addition, it is non-irritating and nonsensitising, so has very little dehydrating effect on lipo-cutaneous tissue. This formulation does not contain any substances listed as carcinogenic, mutagenic, toxic, reprotoxic, harmful, irritant, sensitising, corrosive or hazardous for the environment (French administrative order of 9 November
2004).

VIA 5000 does not cause any occupational diseases. It is not subject to any particular medical surveillance. Never use fuel oil available on a site and classified as a class 3 carcinogen.

Better formulation for the environment

VIA 5000 eliminates the need to comply with French administrative order of 29 May 2000 pertaining to VOC emissions.

VIA 5000 is completely biodegradable and breaks down quickly. Thus, in the event of accidental spillage, it is not harmful for the environment or local populations. It does not give rise to the need for authorisation or notification of use with respect to the administrative authorities(French decree 2002-680).

VIA 5000 is readily biodegradable according to the OECD 301B test (monitoring of CO2 emissions).

Better formulation for waste management

VIA 5000 is classified as NHIW (non-hazardous industrial waste). Following use, it can be collected free of charge for value enhancement.

VIA 5000 is formulated using renewable ingredients that are 100% of vegetable origin and that have been subject to a lifecycle analysis. (ISO 14040)

PHYSICAL AND CHEMICAL PROPERTIES

APPLICATIONS 

DIRECTIONS FOR USE

Spray a fine mist over the surfaces to be treated.

To eliminate bituminous mix deposits, leave to act for several minutes, and then rinse with a high-pressure cleaner.

We cannot be held liable for any application that is not compliant with our instructions and recommendations.

PRESENTATIONS

SDS Available upon request